Blog Post Promotion
The digital turbidity sensor is an instrument used to measure the concentration of suspended particles in water samples. Usually these particles may be composed of sediment, microorganisms, algae or other organic or inorganic substances, which affect the transparency of water, It works based on the principle of light scattering.
Details
The digital conductivity sensor is an instrument used to measure the conductivity (EC) in a solution or water, based on the conductivity of ions in the solution, When current passes through a solution containing ions, the movement of ions produces conductivity.
Details
The digital dissolved oxygen sensor is an instrument used to measure the dissolved oxygen (DO) content in water samples. lt is based on electrochemical principle and uses platinum electrodes for the reduction reaction of oxygen molecules.
Details
The digital pH sensor is used to accurately measure the pH value of the solution, that is, the acidity and alkalinity of the solution. lt is based on a glass electrode and can provide accurate pH measurement, usually with an accuracy of +0.01pH unit.
Details
Product Introduction The ambient air NMTC continuous automatic monitoring system consists of sampling manifold, pretreatment unit, analytical instrument, hydrogen generator, zero gas generator, air compressor, meteorological parameters, dynamic calibrator, electronic control unit, etc. It adopts the direct measurement method of cold trap enrichment to monitor the NMTC organics, which features low detection limit and good reproducibility. […]
Details
ZWIN-NS06 environmental noise automatic monitoring system is composed of noise collection and analysis module, communication module and power module. It is a device suitable for real-time monitoring of outdoor noise.
Details
（1）Digital Residual Chlorine Sensor ZWIN-LCL1006 Product introduction: The digital residual chlorine sensor is an instrument used to measure the concentration of residual gas in water samples. Residual chlorine refers to the remaining chlorine in the water, including free chlorine and combined chlorine. It is the chlorine used to kill bacteria and other micro organisms during […]
Details
Digital PH Sensor-ZW-PH1006 Product introduction: The digital pH sensor is used to accurately measure the pH value of the solution, that is, the acidity and alkalinity of the solution. It is based on a glass electrode and can provide accurate pH measurement, usually with an accuracy of ±0.01pH unit. The sensor outputs a […]
Details
ZWIN-AQMSF06 drone-mounted micro air quality online monitor is a highly integrated, intelligent and lightweight sensor component used to provide an economical and lightweight product for real-time and accurate monitoring of pollutants in the area by drones.
Details
Product Introduction ZWIN-AQMS10-A Ambient Air Quality Automatic Monitoring Vehicle is designed and manufactured in accordance with GB3095-2012 Ambient Air Quality Standards for environmental monitoring, meeting the requirements for rapid measurement of monitoring parameters in environmental monitoring and environmental emergency situations. The monitoring vehicle integrates various particle analyzers, gas analyzers, management software, etc. on a […]
DetailsClick one of our contacts below to chat on WhatsApp
Tianjin Zwinsoft Technology Co., Ltd